SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 457)

B
ROADCAST
C
OMMANDS
4-157
Example
The following shows how to configure broadcast storm control at 600
packets per second:
switchport broadcast
This command enables broadcast storm control on an interface. Use the
no form to disable broadcast storm control on an interface.
Syntax
[no] switchport broadcast
Default Setting
Enabled
Command Mode
Interface Configuration
Example
The following shows how to disable broadcast storm control on an
interface:
Console(config)#broadcast packet-rate 600
Console(config-if)#no switchport broadcast