SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 583)

S
WITCH
C
LUSTER
C
OMMANDS
4-283
Command Usage
• This command only operates through a Telnet connection to the
Commander switch. Managing cluster Members using the local
console CLI on the Commander is not supported.
• There is no need to enter the username and password for access to the
Member switch CLI.
Example
show cluster
This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
show cluster members
This command shows the current switch cluster members.
Command Mode
Privileged Exec
Vty-0#rcommand id 1
CLI session with the SMC6128L2 is opened.
To end the CLI session, enter [Exit].
Vty-0#
Console#show cluster
Role: commander
Interval heartbeat: 30
Heartbeat loss count: 3
Number of Members: 1
Number of Candidates: 2
Console#