SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 560)

C
OMMAND
L
INE
I
NTERFACE
4-260
access to the switch. If you assign an IP address to any other
VLAN, the new IP address overrides the original IP address
and this becomes the new management VLAN.
Example
In the following example, the device is assigned an address in VLAN 1.
Related Commands
ip dhcp restart (4 -260)
ip dhcp restart
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• This command issues a BOOTP or DHCP client request for any IP
interface that has been set to BOOTP or DHCP mode via the ip
address command.
• DHCP requires the server to reassign the client’s last address if
available.
• If the BOOTP or DHCP server has been moved to a different
domain, the network portion of the address provided to the client will
be based on this new domain.
Console(config)#interface vlan 1
Console(config-if)#ip address 192.168.1.5 255.255.255.0
Console(config-if)#