SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 509)

VLAN C
OMMANDS
4-209
private-vlan
Use this command to create a primary or community VLAN. Use the no
form to remove the specified private VLAN.
Syntax
private-vlan vlan-id {community | primary}
no private-vlan vlan-id
• vlan-id - ID of private VLAN. (Range: 1-4093, no leading zeroes).
• community – A VLAN in which traffic is restricted to host
memebers in the same VLAN and to promiscuous ports in the
associate primary VLAN.
• primary – A VLAN which can contain one or more community
VLANs, and serves to channel traffic between community VLANs
and other locations.
Default Setting
None
Command Mode
VLAN Configuration
Command Usage
• Private VLANs are used to restrict traffic to ports within the same
community VLAN, and channel traffic passing outside the
community through promiscuous ports. When using community
VLANs, they must be mapped to an associated “primary” VLAN that
contains promiscuous ports.
• Port membership for private VLANs is static. Once a port has been
assigned to a private VLAN, it cannot be dynamically moved to
another VLAN via GVRP.
• Private VLAN ports cannot be set to trunked mode. (See “switchport
mode” on page -200.)