SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 427)

SNMP C
OMMANDS
4-127
snmp-server community
This command defines the SNMP v1 and v2c community access string.
Use the no form to remove the specified community string.
Syntax
snmp-server community string [ro|rw]
no snmp-server community string
• string - Community string that acts like a password and permits
access to the SNMP protocol. (Maximum length: 32 characters,
case sensitive; Maximum number of strings: 5)
• ro - Specifies read-only access. Authorized management stations are
only able to retrieve MIB objects.
• rw - Specifies read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
Default Setting
• public - Read-only access. Authorized management stations are only
able to retrieve MIB objects.
• private - Read-write access. Authorized management stations are able
to both retrieve and modify MIB objects.
Command Mode
Global Configuration
Example
snmp-server contact
This command sets the system contact string. Use the no form to remove
the system contact information.
Syntax
snmp-server contact string
no snmp-server contact
Console(config)#snmp-server community alpha rw
Console(config)#