Figure 3-104. mvr port configuration -228 – SMC Networks SMC Tiger 10/100 SMC6128L2 User Manual
Page 282
Advertising
C
ONFIGURING
THE
S
WITCH
3-228
- Receiver – A subscriber port that can receive multicast data sent
through the MVR VLAN.
- Non-MVR – An interface that does not participate in the MVR
VLAN. (This is the default type.)
•
Immediate Leave – Configures the switch to immediately remove an
interface from a multicast stream as soon as it receives a leave message
for that group.
•
Trunk – Shows if port is a trunk member (Port Configuration only).
Web – Click MVR, Port or Trunk Configuration.
Figure 3-104. MVR Port Configuration
Advertising