SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 494)

C
OMMAND
L
INE
I
NTERFACE
4-194
show spanning-tree
This command shows the configuration for the common spanning tree
(CST).
Syntax
show spanning-tree [interface]
• interface
- ethernet unit/port
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-28)
- port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use the show spanning-tree command with no parameters to
display the spanning tree configuration for the switch for the
Common Spanning Tree (CST) and for every interface in the tree.
• Use the show spanning-tree interface command to display the
spanning tree configuration for an interface within the Common
Spanning Tree (CST).
• For a description of the items displayed under “Spanning-tree
information,” see “Configuring Global Settings” on page 4 -149. For
a description of the items displayed for specific interfaces, see
“Displaying Interface Settings” on page 4 -153.