Configuring 802.1x global settings, Configuring 802.1x global settings -91, Figure 3-40. 802.1x global configuration -91 – SMC Networks SMC Tiger 10/100 SMC6128L2 User Manual
Page 145: Command attributes
U
SER
A
UTHENTICATION
3-91
CLI – This example shows the default global setting for 802.1X.
Configuring 802.1X Global Settings
The 802.1X protocol provides port authentication. The 802.1X protocol
must be enabled globally for the switch system before port settings are
active.
Command Attributes
•
802.1X System Authentication Control – Sets the global setting for
802.1X. (Default: Disabled)
Web – Select Security, 802.1X, Configuration. Enable dot1x globally for
the switch and click Apply.
Figure 3-40. 802.1X Global Configuration
CLI – This enables 802.1X globally for the switch
Console#show dot1x
Global 802.1X Parameters
system-auth-control: Disabled
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
802.1X Port Details
802.1X is disabled on port 1/1
.
.
.
802.1X is disabled on port 1/28
Console#
Console(config)#dot1x system-auth-control
Console(config)#