SMC Networks SMC Tiger 10/100 SMC6128L2 - Manual (Page 545)

IGMP F
ILTERING AND
T
HROTTLING
C
OMMANDS
4-245
• When the access mode is set to permit, IGMP join reports are
processed when a multicast group falls within the controlled range.
When the access mode is set to deny, IGMP join reports are only
processed when a multicast group is not in the controlled range.
Example
range
This command specifies multicast group addresses for a profile. Use the
no form to delete addresses from a profile.
Syntax
[no] range low-ip-address [high-ip-address]
• low-ip-address - A valid IP address of a multicast group or start of a
group range.
• high-ip-address - A valid IP address for the end of a multicast group
range.
Default Setting
None
Command Mode
IGMP Profile Configuration
Command Usage
Enter this command multiple times to specify more than one multicast
address or address range for a profile.
Example
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#permit
Console(config-igmp-profile)#
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#range 239.1.1.1
Console(config-igmp-profile)#range 239.2.3.1 239.2.3.100