Invalid wpa passphrase, Another device connected to the access point – Kodak ESP 9 User Manual

Page 119

Advertising
background image

www.kodak.com/go/aiosupport

111

Kodak ESP 9 All-in-One printer

NOTE: Some access points provide more than one WEP key. Make sure you use the

first WEP key (index 1) when setting up your wireless network.

Invalid WPA Passphrase

Probable Cause

You have entered the WPA passphrase incorrectly.

Corrective Action

Enter the correct passphrase. Make sure it has between 8 and 63 characters, and
matches the passphrase programmed in the access point (case sensitive).

Another device connected to the access point

Probable Cause

Another device in the vicinity connected to your access point before the All-in-One
printer was able to connect.

Corrective Action

Cancel the setup and start over.

Advertising