Kodak ESP 9 - Manual (Page 77)

www.kodak.com/go/aiosupport 69
Kodak ESP 9 All-in-One printer
The Send Fax menu displays the Fax phone number of the Quick Dial entry on
the LCD screen. The Quick Dial entry is highlighted (selected) on the LCD
screen. See the illustration below.
5. Press Start to send the fax.
Specifying a quick dial recipient from the send fax menu
1. Load the original. As appropriate, review Preparing a fax for transmission,
page 72 .
2. From the control panel, press Menu .
3. Press to select Send Fax and then press OK .
The list of Phonebook and Quick Dial entries displays in the Send Fax menu. The
last Fax number used displays in the header, above the first row, as shown below.
4. To use the last fax number used, press Start now. Otherwise, press until the
desired recipient is either shown in the display or is selected.
5. Use one of the following methods to specify a Quick Dial recipient:
a. Press the Quick Dial number on the keypad, and then press Start . For
example, press 8 to specify the entry assigned the Quick Dial value of “08.”
See the illustration below.