Kodak ESP 9 - Manual (Page 55)

www.kodak.com/go/aiosupport 47
Kodak ESP 9 All-in-One printer
Loading envelopes
NOTE: Review Things to keep in mind, page 44 .
1. Remove all other paper from the paper tray you plan to use.
2. Place one or more envelopes along the right edge of the paper tray, with the
front side down and the envelope flaps pointing toward the left side of the tray.
3. Squeeze the paper edge guide and move it to the right until it just touches the
loaded envelope(s).
4. Close the paper tray and lower the paper output tray.
Loading legal size paper
1. Remove all other paper from the bottom tray.
2. Press and hold the paper tray extension-release, located on the inside of the
front of the bottom paper tray.
WARNING: Do not load envelopes with cutouts or cellophane windows in this
printer.