Kodak ESP 9 - Manual (Page 64)

Viewing and Printing Photos
56 www.kodak.com/go/aiosupport
If your device prompts you for the printer’s personal identification number
(PIN) to authenticate and initiate the connection, enter
1111 .
Bluetooth devices do not use a Print command. You must use the device’s Send
function to transmit an image stored on it to the All–in–One printer. Only one file can
be sent from the device at a time. Once received, your printer will print the image
automatically using the default settings.
Range
When the device and the printer are connected, you can send photos from your
Bluetooth device to the printer. Your printer supports connectivity to one Bluetooth
device at a time.
For the highest transfer speed, Kodak recommends keeping a maximum distance of
10 meters (32.8 feet) between Bluetooth devices, as they may not work reliably
beyond this range.
Printing multiple photos
When you select a print size that is smaller than the paper size, this printer
automatically lays out multiple photos using the least amount of space, minimizing
paper waste when separating the photos.
Printing panoramic photos
You can print a panoramic photo on 4 x 12 paper, or two panoramic photos on U.S.
letter or A4 paper; some cropping will occur.
Zooming and cropping photos
Your printer enables you to zoom in or out on a specific area of a photo. When you
print the photo, the photo is cropped so only the area bounded by the crop
boundaries is printed.
CAUTION:
You cannot use the zoom or crop functions of this printer on photos located on
a PictBridge camera connected to the printer. All changes made to photos
stored on PictBridge camera are conducted on the camera.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo, and will not be saved on the memory card or storage device.
1. Select an image from the display. As needed, see Printing photos from
non–PictBridge digital cameras, memory cards, and USB flash drives, page 53 .
2. As desired, press Menu to display the Print Photos Options menu. The first
option is Print Size. Press the and navigation buttons on the control panel
to change the size of the output that you want for the image, which will affect
the zoom and crop displays. Press
OK when you are satisfied.