Manually receiving fax, Specifying a distinctive ring for fax auto–answer, Specifying a distinctive ring for – Kodak ESP 9 User Manual

Page 49: Specifying a

Advertising
background image

www.kodak.com/go/aiosupport

41

Kodak ESP 9 All-in-One printer

NOTE: Some phone system features may not be available with pulse dialing, which

is slower than tone dialing. Contact your telephone company if you are
unsure as to which setting to use.

Manually receiving fax

If fax auto–answer is set to

Off

, there are two ways to accept an incoming fax and

print it with the All–in–Oneprinter. You can:

• Press the

Start

button on the All–in–One printer control panel when you pick up

the telephone handset and hear fax tones.

• Using any phone that uses the same telephone line used by the All–in–One

printer for fax, dial the Remote Access Code

234

.

Specifying a distinctive ring for fax auto–answer

If you have one phone line shared by two or more phone numbers, your telephone
service provider may be able to provide distinctive ring patterns for each phone
number. For example, if you have designated one number as the number for
receiving and sending faxes, you may have a ring pattern different than the pattern
used for the phone number used for your personal voice calls or your business voice
calls.If you have voice mail on your shared phone line that you use for sending or
receiving faxes and do not have access to distinctive ring through your telephone
service, you should disable fax auto-answer.

By using the

distinctive ring

feature on the ESP 9 All-in-One printer, when the printer

detects the ring pattern specified for incoming faxes, it will automatically answer the
call and receive the fax.

NOTE: If you use one phone number and one phone line exclusively for faxes, set

distinctive ring

to

Any

. For more information about the Fax Settings menu,

see

Fax Settings options, page 42

.

If two or more phone numbers are shared, set the distinctive ring feature to answer
one of the lines and set

fax auto–answer

to

On

. See

Specifying rings to answer,

page 40

to review how to use fax auto–answer with an answering machine.

Also see the note discussing voice messaging services on

page 41

if you have this

type of fax setup and subscribe to voice messaging through your telephone
company.

Tip: Is your All–in–One printer located in a separate room from a telephone with
the same number used by the ESP 9 All-in-One printer? If so, remember to dial
234 when you pick up the phone and hear incoming fax tones.

Advertising