Kodak ESP 9 - Manual (Page 78)

Faxing
70 www.kodak.com/go/aiosupport
b. Press OK to accept the selected value, and then press Start .
The Fax number of the recipient display on the LCD screen, and the row
representing the entered Quick Dial entry is selected in the display, as shown
in the illustration below.
Canceling faxes
To abort a fax after dialing the number, press Cancel from the control panel.
Receiving faxes
If you use your All-in-One printer to receive faxes, remember to load the bottom
paper tray with paper beforehand.
If you set Fax Auto-Answer Off , you will need to receive faxes manually. See below.
Each fax will be printed once it has been received. A Fax Confirmation page will be
printed if setting is enabled. See
Fax reports, page 75 .
Receiving faxes automatically
To receive faxes automatically, see Setting up the fax, page 34 .
Manually receiving faxes
When you hear the phone ring and want to receive a fax, press Start on the control
panel.
NOTE: If the phone used to receive faxes uses a voice-messaging service provided
by your telephone service provider, you may not be able to receive faxes
automatically. Review
Setting up the fax, page 34 . Contact your telephone
company for additional information as needed.