Kodak ESP 9 - Manual (Page 51)

www.kodak.com/go/aiosupport 43
Kodak ESP 9 All-in-One printer
a
Some phone system features may not be available with pulse dialing, which is
slower than tone dialing. Contact your telephone company if you are unsure about
which setting to use.
b
When the Error Correction mode is enabled, the printer detects errors during
transmission. Using this feature, the All-in-One printer will automatically
re-transmit the fax. Although the Error Correction mode increases send time on poor
phone lines, the fax is transmitted much more reliably.
NOTE: Error Correction is only applied to black-and-white faxes sent from the
All-in-One printer. This feature does not affect the reliable transmission of
faxes being received.
1. From the control panel, press Menu .
2. Press until Fax Settings is selected, and then press OK .
3. Press until the option you want to configure is selected, and then press OK .
4. As needed, press or to set the desired sub-setting, as in configuring your
sender name and telephone numbers.
5. As needed, press or to change the setting.
6. Press OK to save the setting(s).