Kodak ESP 9 - Manual (Page 47)

www.kodak.com/go/aiosupport 39
Kodak ESP 9 All-in-One printer
receive faxes, use the LINE-In port on your printer. Do not connect the answering
machine to the EXT-Out port on your printer.
If you have a separate fax line on that does not receive any voice calls, connect
your printer to the phone line as described in
Connecting the printer to a digital
subscriber (DSL) telephone line below.
Connecting the printer to a digital subscriber (DSL) telephone line
If you use a digital subscriber line (DSL), you must connect a DSL filter between the
telephone wall jack and your Kodak All–in–One printer. Without the DSL filter for
your digital subscriber line, you not be able to send and receive faxes.
1. Obtain a DSL filter from your DSL provider.
2. Connect the one end of the phone cord supplied with your Kodak ESP 9
All–in–One printer to the open port on the DSL filter, and the other to the printer
port labeled
Line-In .When the phone rings your printer is set to answer
automatically after the number of rings set in the Rings to Answer setting. See
Specifying rings to answer, page 40 .
3. If you use an answering machine, connect your answering machine to the port
labeled EXT-Out on your printer. This provides a direct connection between the
printer and your answering machine.
CAUTION:
When the phone rings, your printer will answer after the number of rings set
in the Rings to Answer setting. The incoming fax will be received when the
printer detects there is an incoming fax.
See Specifying rings to answer, page 40 .
4. Connect the DSL filter cord to the telephone wall jack.