Kodak ESP 9 - Manual (Page 24)

Printer Overview
16 www.kodak.com/go/aiosupport
Status lights
The tables below describe the meaning of each light and condition, and offer tips on
what action to take.
a
Most power supplies used with this ESP All-in-One printer are equipped with a
status light which illuminates when electricity is applied. If you cannot determine if
the power supply is working properly, contact Kodak Service & Support for
assistance.
Main menu option When you press OK : To review details about the option:
Copy Document Displays Copy Document Options menu See Copy Document options, page 60
Copy Photo Displays Copy Photo Options menu See Copy Photo options, page 61
View and Print Photos Displays Print Photos Options menu See Print Photos options, page 52
Scan Displays Scan Options menu See Scan options, page 65
Send Fax Displays Fax Options menu See Using quick dial to select a fax
phonebook entry, page 68
Fax Auto-Answer Sets Fax Auto-Answer On or Off See Setting fax auto–answer, page 40
Fax Settings Displays Fax Settings menu See Fax Settings options, page 42
Network Settings Displays Network Settings menu See Network Settings options, page 26
Printer Settings Displays Printer Settings menu See Printer Settings options, page 22
Maintenance Displays Maintenance menu See Maintenance options, page 78
Help Displays Help menu See Help menu, page 1
On/Off Lights
Light Status Cause Action / Solution
Off The printer is turned off. Press On/Off to turn the printer on.
The printer does not have
power applied. Ensure that the printer power cord is
properly plugged into the back of the
printer.
Verify that the power supply and or power
cord LED is lit.
Check that the power supply is connected
to the power cord, and that it is properly
connected to the electrical outlet.
a
Blinks The printer is initializing or
busy. None. Allow the printer to finish the
initialization process.
On The printer is ready. None.