Using quick dial to select a fax phonebook entry, Specifying a quick dial recipient from the keypad, Using quick dial to select a fax – Kodak ESP 9 User Manual
Page 76
Faxing
68
www.kodak.com/go/aiosupport
The Fax phone number of the selected entry displays in the menu header,
replacing any previous number. See the illustration below.
5. Press
Start
to send the fax.
Using quick dial to select a fax phonebook entry
By assigning up to ten contacts in your Fax Phonebook with a number between 0
(zero) and 9, the Quick Dial feature in your ESP 9 All-in-One printer allows you to
create shortcuts for quickly sending Faxes to them
NOTE: To configure a fax recipient as a Quick Dial entry, review
.
There are two ways to use the Quick Dial feature for sending faxes.
Specifying a quick dial recipient from the keypad
1. Load the original. As appropriate, review
Preparing a fax for transmission,
2. From the control panel, press
Menu
.
3. Press
to
select
Send Fax
and then press
OK
.
4. Select the appropriate key on the control panel’s keypad associated with the
Quick Dial entry, and then press
Start
. For example, press
8
to specify the entry
assigned the Quick Dial value of “08.” See the illustration below.