Kodak ESP 9 - Manual (Page 87)

www.kodak.com/go/aiosupport 79
Kodak ESP 9 All-in-One printer
Replacing ink cartridges
Your Kodak printer uses separate black and color ink cartridges. The ink levels are
shown on the control panel and in the printer software.
CAUTION:
For the best quality prints, store ink cartridges in locations where the
temperature does not exceed 85°F (30°C).
1. Make sure the printer is turned on.
2. Open the printer access door by lifting from the recessed hand-holds on the
sides of the unit.
The printhead moves to an accessible position for handling the ink cartridges.
The ink cartridges are seated in the printhead.
Tip: A printhead alignment and a check of the inkjet nozzle can also be
initiated from the Home Center software.
Windows: Open the Home Center Help panel by clicking Help on
the Home Center window, as needed. Click Maintenance, and then
click Nozzle Check or Printhead Alignment.
Macintosh: Open Home Center window from the dock, and click
Maintenance, and then click Nozzle Correction or Printhead
Alignment.
WARNING: Use genuine Kodak ink cartridges to ensure best results
and avoid printhead damage not covered under warranty.
Third-party ink cartridges may not work with your printer.