Safety specifications, Parts, Power – Kodak ESP 9 User Manual

Page 126: Parts power

Advertising
background image

Product and Safety Specifications

118

www.kodak.com/go/aiosupport

Safety Specifications

• Read and follow these cautions and warnings before using Kodak products.

• Always follow basic safety procedures.

• Follow all warnings and instructions marked on the Kodak All-in-One printer.

Parts

CAUTION:

Do not disassemble this product; there are no user-serviceable part(s) inside.
Refer servicing to Kodak’s qualified service personnel.

Power

CAUTION:

If the power cord or plug is frayed or damaged, the equipment gets wet, or the
equipment does not operate normally when the operating instructions are
followed, unplug your printer from the power outlet and have qualified service
personnel service your printer.

CAUTION:

The alternating current (AC) adapter power supply is equipped with a
three-wire grounding type plug. If you cannot insert the plug into the power
outlet, contact an electrician to check or replace the power outlet.

Photo

4 x 6 in. (102 x 152 mm)

4 x 7 in. (102 x 178 mm)

4 x 12 in. (102 x 305 mm)

5 x 7 in. (127 x 178 mm)

8 x 10 in. (203 x 254 mm)

US Letter (8.5 x 11 in.) (216 x 280 mm)

A4 (210 x 297 mm)

Greeting card

4 x 5.5 in. (101 x 140 mm)

4 x 8 in. (101 x 203 mm)

Paper Sizes Supported

WARNING: Keep out of reach of children. Ink may be harmful if swallowed.

Advertising