Usb host port, Control panel layout – Kodak ESP 9 User Manual
Page 14
Printer Overview
6
www.kodak.com/go/aiosupport
Additionally, the printer supports the following memory cards used with Memory
Stick and SD/MMC card slot adapters, which you will need to purchase separately:
• Memory Stick Duo and Memory Stick Duo Pro
• miniSD
• MicroSD (TransFlash)
USB host port
This All-in-One printer works with most digital cameras. Using the USB port located
on the front of the printer, you can connect one of the following devices to the printer
at a time:
• PictBridge or PictBridge camera
• USB portable storage drive
• Kodak Bluetooth dongle
• Digital cameras
NOTE: This printer can read only one memory card OR one portable USB drive OR
one Kodak Bluetooth dongle at a time.
Control panel layout
The legend describing the numbered parts of the control panel illustration is in the
table below.