KORG TouchView Trinity ProX - Manual (Page 109)

40: L/C/R Delay
105
size2
40: L/C/R Delay
This multitap delay outputs three Tap signals to the left, right, and center respectively. You can also adjust
the left and right spread of the delay sound.
a
L Delay Time [msec] 0…1360msec Sets the TapL delay time.
Level 0…50 TapL output level
b
C Delay Time [msec] 0…1360msec Sets the TapC delay time.
Level 0…50 TapC output level
c
R Delay Time [msec] 0…1360msec Sets the TapR delay time.
Level 0…50 TapR output level
d
Feedback –100…+100 Sets the TapC feedback amount.
Src None…Tempo Modulation source of the TapC feedback amount
Amt –100…+100 Modulation amount of the TapC feedback amount
e High Damp [%] 0…100% Damping amount in the high range
☞
P.44
f Low Damp [%] 0…100% Damping amount in the low range ☞ P.44
g
Input Level D-mod: Src None…Tempo Modulation source of the input level ☞ P.44
Amt –100…+100 Modulation amount of the input level
h Spread 0…50
Sets the width of the stereo image of the effect sound.
☞ P.65
i
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High Damp Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level