KORG TouchView Trinity ProX - Manual (Page 123)

00: Piano Body/Damper (Piano Body/Damper Simulation)
119
size4
00: Piano Body/Damper
(Piano Body/Damper Simulation)
This effect simulates the resonance of the piano sound board caused by the string vibration, and also sim-
ulates the resonance of other strings that are not being played when you press the damper pedal. It will
create a very realistic sound when applied to acoustic piano sounds.
a Sound Board Depth 0…100
Sets the intensity of resonance of the sound board.
☞ P.119
b
Damper Depth 0…100
Sets the intensity of the string resonance created when
the damper pedal is pressed.
☞ P.119
Src None…Tempo Modulation source of damper effect
c Tone 1…100 Adjusts tonal quality of effect sound. ☞ P.119
d Mid Shape 0…36 Adjusts the mid range of tonal quality. ☞ P.119
e Tune –50…+50 Fine tuning
☞
P.119
f
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
a: Sound Board Depth This parameter sets the intensity of resonance of the piano sound board.
b: Damper Depth
b: Src This parameter sets the resonance intensity of the other strings created when the
damper pedal is pressed. The Src parameter selects the modulation source from
which the damper effect is applied. Usually, select Sustain Pdl (Sustain pedal).
The effect is off when a value for the modulation source specified for the
Src parameter is 63 or smaller, and the effect is on when the value is 64 or
higher.
c: Tone
d: Mid Shape These parameters control the tonal quality of the effect sound.
e: Tune Since this effect simulates the resonance of the strings, the sound varies depend-
ing on the pitch. If you have changed tuning using the Master Tune, adjust this
parameter value.
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
D -mod
Piano
Body/Damper
Simulation
Damper
+