2band pitch shifter – KORG TouchView Trinity ProX User Manual

Page 136

Advertising
background image

11: 2Band Pitch Shifter

132

11: 2Band Pitch Shifter

This pitch shifter sets an individual shift amount for the high and low input signal ranges. If you apply a
detune effect to the high range of a string sound, and add the lower octave to the low range, a large
ensemble sound is produced.

a

Mode

Slow, Medium, Fast

Switches pitch shifter mode.

P.96

b

Low Pitch [1/2tone]

–24…+24

Sets pitch shift amount for the low range in steps of a
semitone.

P.97

Src

None…Tempo

Modulation source of pitch shift amount

Amt

–24…+24

Modulation amount of pitch shift amount for the low range

c

Low Fine [cent]

–100…+100cent

Sets pitch shift amount for the low range in steps of one
cent.

P.97

Amt

–100…+100cent

Modulation amount of pitch shift amount for the low range

d

Low High Damp [%]

0…100%

High component damping amount in the low range

e

High Pitch [1/2tone]

–24…+24

Sets pitch shift amount for the high range in steps of a
semitone.

P.97

Amt

–24…+24

Modulation amount of pitch shift amount for the high
range

f

High Fine [cent]

–100…+100cent

Sets pitch shift amount for the low range in steps of one
cent.

P.97

Amt

–100…+100cent

Modulation amount of pitch shift amount for the high
range

g

High High Damp [%]

0…100%

High component damping amount in the high range

h

High/Low Split Point

1…100

Splits frequencies between low and high ranges

High/Low Balance

Low, 1:99…99:1, High

Output balance between low and high ranges

i

Spread

–100…+100

Sets the width of the stereo image of the effect sound.

P.132

j

Wet/Dry

Dry, 1:99…99:1, Wet

Sets the balance between the effect and dry sounds.

Src

None…Tempo

Modulation source of effect balance

Amt

–100…+100

Modulation amount of effect balance

i: Spread

This parameter specifies the width of the stereo image of the effect sound. With
a value of +100, the low range signal is output from the left channel and the high
range signal from the right channel. With a value of 0, both channels will output
a mix signal of low and high-range signals. With a negative value, the output
channel of the low and high-range signals will be reversed.

Left

Right

Wet / Dry

Wet / Dry

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out

High Damp

High Damp

+

Pitch Shifter

Pitch Shifter

Spread

High/Low Split Point

High/Low

Balance

Advertising
This manual is related to the following products: