KORG TouchView Trinity ProX - Manual (Page 86)

26: Doppler
82
26: Doppler
This effect simulates a “Doppler effect” (sound moving while changing its pitch) that sounds, for exam-
ple, like an ambulance siren passing by. Mixing the effect sound with the dry sound will create a special
chorus effect.
a
LFO Mode Loop, 1-Shot Switches LFO operation mode. ☞ P.82
Src None…Tempo
When LFO Mode is set to 1-Shot, this modulation source
triggers the LFO.
b
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…Tempo Modulation source of LFO speed
Amt –20.00…+20.00Hz Modulation amount of LFO speed
c
Pitch Depth 0…100 Pitch variation of the moving sound ☞ P.83
Src None…Tempo Modulation source of pitch variation
Amt –100…+100 Modulation amount of pitch variation
d
Pan Depth –100…+100 Panning of the moving sound ☞ P.83
Src None…Tempo Modulation source of panning
Amt –100…+100 Modulation amount of panning
e
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
a: LFO Mode
a: Src The LFO Mode parameter switches LFO operation mode. When Loop is
selected, the Doppler effect will be created repeatedly.
When LFO Mode is set to 1-Shot, the Doppler effect is created only once when
the modulation source specified in the Src field is turned on. At this time if you
do not set the Src parameter, the Doppler effect will not be created, and no effect
sound will be output.
The effect is off when a value for the modulation source specified for the
Src parameter is smaller than 64, and the effect is on when the value is 64
or higher. The Doppler effect is triggered when the value changes from 63
or smaller to 64 or higher.
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Pan Depth
D -mod
+
Trigger LFO Mode = 1-Shot
Doppler
LFO