KORG TouchView Trinity ProX - Manual (Page 83)

24: Stereo Vibrato
79
size2
The following is an example of fade-in where the LFO speed is increased from
“1.0Hz” to “4.0Hz” when a note-on message is received.
a: AUTOFADE Src = Gate1
e: LFO Frequency [Hz] = 1.0
e: Src = AUTOFADE
e: Amt = 3.0
The effect is off when a value for the dynamic modulation source speci-
fied for the AUTOFADE Src parameter is smaller than 64, and the effect is
on when the value is 64 or higher. The AutoFade function is triggered
when the value changes from 63 or smaller to 64 or higher.
Note On All Note Off
Fade-In Rate
AUTOFADE Src=Gate1
LFO Frequency[Hz]=1.0
Src=AUTOFADE
Amt=+3.0
LFO Frequency
=1.0+3.0=4.0Hz
LFO Frequency
=1.0Hz
AUTOFADE
Gate1 Signal
AUTOFADE
AutoFade
Fade-In Dealy