KORG TouchView Trinity ProX - Manual (Page 24)

05: Parametric 4EQ (Parametric 4-Band EQ)
20
05: Parametric 4EQ
(Parametric 4-Band EQ)
This effect is a four-band parametric equalizer. You can select either a peaking type or a shelving type for
Band 1 and 4. Band 2 allows for gain control via dynamic modulation.
a Trim 0…100 Sets the input level.
b Band1 Type Peaking, Shelving-Low Selects Band 1 type. ☞ P.20
c Band4 Type Peaking, Shelving-High Selects Band 4 type.
☞
P.20
d
Band2 Dynamic Gain Src None…Tempo Modulation source for Band 2 gain ☞ P.21
Amt [dB] –18.0…+18.0dB Amount of Band 2 gain modulation
e
Band1 Cutoff [Hz] 20…1.0kHz Sets the Band 1 center frequency.
Q 0.5…10.0 Sets the Band 1 bandwidth. ☞ P.19
Gain [dB] –18.0…+18.0dB Sets the Band 1 gain.
f
Band2 Cutoff [Hz] 50…10.00kHz Sets the Band 2 center frequency.
Q 0.5…10.0 Sets the Band 2 bandwidth. ☞ P.19
Gain [dB] –18.0…+18.0dB Sets the Band 2 gain.
☞
P.21
g
Band3 Cutoff [Hz] 300…10.00kHz Sets the Band 3 center frequency.
Q 0.5…10.0 Sets the Band 3 bandwidth. ☞ P.19
Gain [dB] –18.0…+18.0dB Sets the Band 3 gain.
h
Band4 Cutoff [Hz] 500…20.00kHz Sets the Band 4 center frequency.
Q 0.5…10.0 Sets the Band 4 bandwidth. ☞ P.19
Gain [dB] –18.0…+18.0dB Sets the Band 4 gain.
i Wet/Dry Dry, 1:99…99:1, Wet Balance between the effect sound and dry sound.
b: Band1 Type
c: Band4 Type Selects a filter type for Band 1 and 4.
In
Wet / Dry
Mono In - Mono Out
Band1 Band2 Band3 Band4
PEQ PEQ PEQ PEQ
LEQ HEQ
Trim
D -mod
3dB
3dB
Band1 Cutoff Band4 Cutoff
0dB
+Gain
–Gain
Band1 Type=Peaking
Band1 Type=Shelving Low
Band4 Type=Peaking
Band4 Type=Shelving High
Parametric 4EQ - Band1, Band4 Type