KORG TouchView Trinity ProX - Manual (Page 30)

09: Dyna Exciter
26
09: Dyna Exciter
This effect gives a frame to a sound and emphasizes the outline. You can control the intensity of the effect
using dynamic modulation.
a
Blend –100…+100 Sets the intensity (depth) of the Exciter effect. ☞ P.26
Src None…Tempo Modulation source of the Exciter intensity
Amt –100…+100 Modulation amount of the Exciter intensity
b
Emphatic Point 0…140 Sets the frequency to be emphasized. ☞ P.26
Src None…Tempo Modulation source of the frequency to be emphasized
Amt –100…+100 Modulation amount of the frequency to be emphasized
c EQ Trim 0…100 2-band EQ input level
d Pre LEQ Gain [dB] –15.0…+15.0dB Low EQ gain
e Pre HEQ Gain [dB] –15.0…+15.0dB High EQ gain
f
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
a: Blend This parameter sets the depth (intensity) of the Exciter effect. Positive values
give a frequency pattern (to be emphasized) different from negative values.
b: Emphatic Point This parameter sets the frequency to be emphasized. Higher values will empha-
size lower frequencies.
In
Wet / Dry
Mono In - Mono Out
EQ Trim
LEQ HEQ
D -mod
Exciter