KORG TouchView Trinity ProX - Manual (Page 40)

19: Tempo Phaser
36
19: Tempo Phaser
This Phaser allows you to match the LFO cycle with the song tempo. For example, you can synchronize
the Phaser to a sequencer rhythm pattern, or you can input a tempo before a live performance so that the
phasing effect will match the song tempo.
a LFO Waveform Triangle, Sine Selects the LFO waveform.
b LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞ P.32
c
LFO Mode Manual, D-mod
Switches between the specified tempo and clock sync.
☞ P.33
Src (fixed) Tempo Source when LFO Mode = D-mod (fixed to Tempo)
d Tempo [beat/min] 30…250 beat/min Tempo when LFO Mode = Manual ☞ P.33
e Length 1…16/1…16 Sets the LFO cycle. LFO Cycle = Length x Whole Note.
f Manual 0…100 Sets the frequency to which the effect is applied.
g Depth 0…100 Depth of LFO modulation
h Resonance –100…+100 Sets the resonance amount.
☞
P.35
i High Damp [%] 0…100%
Sets the resonance damping amount in the high range.
☞
P.35
j
Wet/Dry
–Wet…–1:99, Dry,
1:99…Wet Sets the balance between the effect and dry sounds.
☞ P.25, 35
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Phaser
In
Resonance
LFO Shape LFO: Tri / Sine
Wet / Dry
Mono In - Mono Out
High Damp
Tempo
LFO Mode
D-mod
Manual
Length: 1/4
120 [beat/min]