KORG TouchView Trinity ProX - Manual (Page 127)

04: Vocoder
123
size4
04: Vocoder
This effect adds characteristics of other signals (Modulator) to the input signal (Carrier). The Carrier is
input to the left channel, and the Modulator is input to the right channel. A sound with a lot of harmonics
is suitable for a carrier, while a unique effect sound is suitable for a modulator.
a Lch (Carrier) Trim 0…100 Input level of left channel (Carrier)
b Rch (Modulator) Trim 0…100 Input level of right channel (Modulator)
c Mod High Mix 0…100
Output level of high-range component of right channel
(Modulator)
☞ P.123
d
Vocoder/Carrier 0…100
Balance between vocoder output and left channel (Car-
rier)
☞ P.123
Src None…Tempo
Modulation source of the balance between vocoder out-
put and left channel (Carrier)
Amt –100…+100
Modulation amount of the balance between vocoder out-
put and left channel (Carrier)
e
Wet/Dry Dry, 1:99…99:1, Wet
Sets the balance between the effect and dry sounds.
☞
P.123
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
c: Mod High Mix This parameter sets the high-range output level of the right channel sound
(Modulator). Raise this value to enhance the characteristics of the modulator.
d: Vocoder/Carrier
e: Wet/Dry The Vocoder/Carrier parameter sets the balance between the vocoder sound
and the left channel sound (Carrier). The Wet/Dry parameter sets the balance
between the effect and dry sound.
If you wish to change the intensity of the vocoder effect, select “Wet” for Wet/
Dry, and adjust the balance using the Vocoder/Carrier parameter.
Left
Right
Wet / Dry
Wet / Dry
Wet: Stereo In - Mono Out / Dry: Stereo In - Stereo Out
Band Pass Filter
Envelope
+
Modulator
Carrier
Lch (Carrier) Trim
Rch (Modulator) Trim Mod High Mix
Vocoder / Carrier