KORG TouchView Trinity ProX - Manual (Page 68)

13: Stereo Chorus
64
13: Stereo Chorus
This is a stereo chorus. You can add spread to the sound by offsetting the phase of the left and right LFOs
from each other. The chorus effect can fade-in by means of the AutoFade function.
a
AUTOFADE Src None…Tempo
Selects the modulation source that triggers AutoFade.
☞ P.59
Fade-In Rate 1…100 Sets the rate of fade-in.
b
LFO Waveform Triangle, Sine Selects LFO Waveform.
LFO Phase [degree] –180…+180 LFO phase difference between the left and right ☞ P.65
c
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…AUTOFADE Modulation source of LFO speed. AutoFade is available
Amt –20.00…+20.00Hz Modulation amount of LFO speed
d L Pre Delay [msec] 0.0…50.0msec Delay time for the left channel ☞ P.65
e R Pre Delay [msec] 0.0…50.0msec Delay time for the right channel ☞ P.65
f
Depth 0…100 Depth of LFO modulation
Src None…AUTOFADE
Modulation source of the LFO modulation depth. Auto-
Fade is available
Amt –100…+100 Modulation amount of the LFO modulation depth
g EQ Trim 0…100 EQ input level
h
Pre LEQ Gain [dB] –15.0…+15.0dB Low-EQ gain
Pre HEQ Gain [dB] –15.0…+15.0dB High-EQ gain
i Spread –100…+100
Sets the spread of stereo image of the effect sound.
☞ P.65
j
Wet/Dry
–Wet…–1:99, Dry,
1:99…Wet Sets the balance between the effect and dry sounds.
☞ P.25
Src None…AUTOFADE
Modulation source of effect balance. AutoFade is avail-
able
Amt –100…+100 Modulation amount of effect balance
Chorus
Chorus
Left
Right
Spread
LFO Phase
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
EQ Trim
EQ Trim
LEQ HEQ
LEQ HEQ
LFO: Tri / Sine
AutoFade LFO Frequency
Depth
Wet / Dry