KORG TouchView Trinity ProX - Manual (Page 89)

28: Stereo Auto Pan
85
size2
28: Stereo Auto Pan
This Auto Pan effect pans sound between left and right. It is stereo, and shifting the left and right LFO
phases from each other will simulate the sound of the left and right channels crossing over each other by
turns, or chasing each other.
a LFO Waveform Triangle, Sine Selects LFO Waveform.
b LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞
P.32
c LFO Phase [degree] –180…+180 LFO phase difference between the left and right ☞ P.85
d
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…Tempo Modulation source of LFO speed
Amt –20.00…+20.00Hz Modulation amount of LFO speed
e
Depth 0…100 Depth of LFO modulation
Src None…Tempo Modulation source of the depth of modulation
Amt –100…+100 Modulation amount of the depth of modulation
f
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
b: LFO Shape You can change the panning curve by modifying the LFO waveform.
c: LFO Phase This parameter determines the difference in the left and right LFO phases. When
you change the value gradually from “0”, the sound from the left and right chan-
nels will chase each other around. If you set the parameter to +180 or –180, the
sound from each channel will cross over each other.
You need to input different sounds to each channel in order for this parameter to
be effective.
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth