KORG TouchView Trinity ProX - Manual (Page 153)

01: Delay/Reverb
149
01: Delay/Reverb
This effect is a combination of a multitap delay and a hall-type reverb.
a
L Delay Time [msec] 0…680msec Sets the TapL delay time.
Level 0…30 TapL output level
b
C Delay Time [msec] 0…680msec Sets the TapC delay time.
Level 0…30 TapC output level
c
R Delay Time [msec] 0…680msec Sets the TapR delay time.
Level 0…30 TapR output level
d Feedback –100…+100 Sets the TapC feedback amount.
e
High Damp [%] 0…100% Damping amount in the high range ☞ P.44
Low Damp [%] 0…100% Damping amount in the low range
f
Reverb Time [sec] 0.1…10.0 Sets the period of reverberation time.
High Damp [%] 0…100% Reverberation damping amount in the high range
g
Pre Delay [msec] 0…200msec Reverb delay time
☞
P.116
Pre Delay Thru 0…30 Mix ratio of non-delayed reverb sound
h
EQ Trim 0…30 Reverb input level to EQ
LEQ [dB] –15…+15 Reverb gain for the low-EQ
HEQ [dB] –15…+15 Reverb gain for the high-EQ
i
Spread 0…30
Sets the width of the stereo image of the effect sound.
☞ P.150
Spread Control Delay, Reverb, Both
Determines whether delay output, reverb output, or both
outputs are controlled for the width of the stereo image.
j
Output Level 0…100 Output level of the effect sound
Src None…Tempo Modulation source of output level
Amt –100…+100 Modulation amount of output level
Send2
Mono In - Stereo Out
Return2
Left
Return2
Right
EQ Trim
LEQ HEQ
Output Level
Output Level
Pre Delay Thru
Pre Delay
Spread
Feedback
High Damp Low Damp
Level
Level
Level
L Delay
R Delay
Spread Reverb
C Delay