KORG TouchView Trinity ProX - Manual (Page 82)

24: Stereo Vibrato
78
24: Stereo Vibrato
This is a stereo vibrato. You can set a delay for the time that is taken before the auto-fade starts.
a
AUTOFADE Src None…Tempo
Sets the modulation source that starts AutoFade.
☞ P.78
Fade-In Rate 1…100 Sets the rate of fade-in.
b Fade-In Delay [msec] 00…2000msec Sets delay time for fade-in. ☞ P.78
c LFO Waveform Triangle, Sine Selects the LFO Waveform.
d LFO Shape –100…+100
Determines how much the LFO waveform shape is
changed.
☞ P.32
e
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…AUTOFADE Modulation source of LFO speed. AutoFade is available.
Amt –20.00…+20.00Hz Modulation amount of LFO speed
f
Depth 0…100 Depth of LFO modulation
Src None…Tempo Modulation source of the LFO modulation depth
Amt –100…+100 Modulation depth of the LFO modulation depth
g
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
a: AUTOFADE Src
a: Fade-In Rate
b: Fade-In Delay [msec] If AutoFade is selected for the LFO speed, you can use the AutoFade function to
apply modulation.
The AUTOFADE Src parameter selects the modulation source that triggers Auto-
Fade. The Fade-in Rate parameter specifies the rate of fade-in. The Fade-in Delay
parameter determines the time from AutoFade modulation source ON until the
fade-in starts.
Vibrato
Vibrato
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO: Tri / Sine LFO Shape
Fade-In Delay LFO Frequency AutoFade