Kyocera KM-C1530 - Manual (Page 100)

5 Basic Operations
5-12 KM-C1530
6 Specify any other necessary settings.
❍ Zoom (Refer to page 5-14 for more details.)
❍ Original Image Type (Refer to page 5-18 for more details.)
❍ Density (Refer to page 5-20 for more details.)
7 Press the [Start] key.
To make copies onto thick paper
1 Position the document(s) to be copied. (Refer to page 4-1 for more
details.)
2 Select the desired color mode. (Refer to page 2-20 for more details.)
3 Open the manual bypass tray.
4 Adjust the paper guides to the size
of the paper, and then load the
paper so that the front side of the
paper faces down. Lightly slide the
paper into the feed slot as much as
possible so that it is ready to be fed
into the copier.
❍ Load paper into the manual
bypass tray with the surface to
be copied onto facing down.
5 Make sure that the screen that
allows you to select the manual
bypass tray paper size is displayed,
check that the desired paper size is
selected, and then touch [Paper
Type].