Kyocera KM-C1530 - Manual (Page 173)

Administrator Mode Operations 8
KM-C1530 8-3
To register access codes
1 In the Copy Track screen, touch
[ON], and then touch [Access #
Input].
The Access # Input screen appears.
2 Touch [Account #], and then touch
and to select the desired
account number.
❍ Registering a new access code
with an account number already
registered with an access code
changes the access code to the
new one.
❍ Although account numbers 1
through 99 are already
registered as a default, they can be changed. For more details,
refer to “To change the account numbers registered” on page 8-4.
❍ To specify a new account number, erase a previously registered
account number.
3 Using the keypad, enter the four-
digit access code that you wish to
register. To register other access
codes, repeat steps 2 and 3 until the
desired access codes are
registered.
? Do you wish to change the
access code of an account
number?
➜ Press the [C] (clear) key to erase the entered access code.
? Has registration of the entered access code been cancelled?
➜ If the entered access code is the same as one that has already
been registered, registration is cancelled. Try again using a
different access code.