Kyocera KM-C1530 - Manual (Page 199)

Administrator Mode Operations 8
KM-C1530 8-29
To set the “PRT Area (Left Margin)” parameter
This parameter can be used to adjust the printing position in the
secondary scanning direction when making single-sided copies.
This parameter can be set between –3.0 mm and +3.0 mm, in increments
of 0.2 mm.
The left margin of the print area for the first and second paper drawers is
adjusted during manufacturing of the copier. Normally, the left margin will
not need to be adjusted.
As an example, the following procedure describes how to adjust the left
margin for the third paper drawer.
1 Load paper (11 × 17L) into the third paper drawer.
2 In the Expert User’s Mode screen,
touch [2/2], and then touch [PRT Area
(Left Margin)].
The Left Margin screen appears.
3 Touch [3rd Drawer], and then press
the [Start] key to print out the test
pattern.