Kyocera KM-C1530 - Manual (Page 48)

2 Before Making Copies
2-26 KM-C1530
Energy Saver Mode
Instead of turning off the copier, it can be put into a standby mode (Energy
Saver mode).
Turn the Energy Saver mode on by pressing the [Energy Saver] key. In
addition, if the copier is not used for a set length of time, it automatically
enters Energy Saver mode. The default length of time is 15 minutes.
To cancel Energy Saver mode, press any key in the control panel.
✎
Note
If the copier enters Sleep mode while it is in Energy Saver mode, the
copier will automatically turn itself off.
✎
Tip
The length of time until the copier enters Energy Saver mode can be
set between 1 and 240 minutes.
For more details, refer to “Specifying Default Settings (“User’s Choice”
Function)” on page 7-8 and page 7-16.
Delayed Copy Jobs
If a document is loaded and the [Start] key is pressed during the period
after the copier is turned on but before it is ready to begin copying, the
copier will automatically begin copying after it has finished warming up.
Sleep Mode
When the printer controller is not installed:
If the copier is not used for a set length of time, it can automatically turn
itself off in order to save energy. The default length of time is 30 minutes.
When the printer controller is installed:
If the copier is not used for a set length of time, it will automatically enter
a standby mode (Energy Saver mode) in order to save energy. The default
length of time is 30 minutes. To cancel this mode, press any key in the
control panel.
✎
Tip
The length of time until the copier enters Sleep mode can be set
between 15 and 240 minutes. The “Sleep Mode” parameter can even
be turned off.
For more details, refer to “Specifying Default Settings (“User’s Choice”