Kyocera KM-C1530 - Manual (Page 99)

Basic Operations 5
KM-C1530 5-11
To make copies onto postcards
1 Position the document(s) to be copied. (Refer to page 4-1 for more
details.)
2 Select the desired color mode. (Refer to page 2-20 for more details.)
3 Open the manual bypass tray.
4 Adjust the paper guides to the size
of the paper, and then load the
paper so that the front side of the
paper faces down. Lightly slide the
paper into the feed slot as much as
possible so that it is ready to be fed
into the copier.
❍ Load postcards widthwise into
the manual bypass tray with the
surface to be copied onto facing
down.
5 Make sure that the screen allowing
you to select the manual bypass
tray paper size is displayed, and
then touch [4 × 6].
The “Paper Type” setting
automatically changes to “Thick
Paper 2”.
(* Setting the paper size for the
manual bypass tray to “4 × 6”
automatically changes the “Paper
Type” setting to “Thick Paper 2”.)