Kyocera KM-C1530 - Manual (Page 142)

6 Advanced Operations
6-30 KM-C1530
6.9 Inserting Pages Between Copies of Overhead
Transparencies (“OHP Interleaving” Function)
After each overhead transparency is copied, a page from a different paper
source can be added to the stack of transparencies as an overleaf. In
order to use this function, the overhead transparencies should be loaded
into the multipurpose paper drawer (1st drawer).
✎
Note
We recommend that interleaf paper (inserted paper) with the same
size as the overhead transparencies first be loaded into any drawer
other than the multipurpose paper drawer (1st drawer) with the same
orientation as the overhead transparencies.
To set the “OHP Interleaving” function
1 Position the document(s) to be copied. (Refer to page 4-1 for more
detail.)
2 Load the overhead transparencies into the 1st drawer, and then set
the media type selection dial on the drawer to “OHP”.
3 Select the desired color mode. (Refer to page 2-20 for more detail.)
4 Touch [Auxiliary].
The Auxiliary screen appears.
5 Touch [OHP Interleaving].