Kyocera KM-C1530 - Manual (Page 73)

Original Documents 4
KM-C1530 4-1
4 Original Documents
4.1 Feeding the Document
The document can be fed in three different ways. Depending on the type
of document being fed, position the document correctly so that it is fed
using the appropriate feed method.
Document Feed Method Features
Multi-sheet feeding Using the duplexing document feeder, a multi-page document
can be fed automatically. This feed method can also be used
with double-sided documents, and is best with multi-page
double-sided documents. See p. 4-4, p. 4-5, p. 6-17.
Single-sheet feeding Using the duplexing document feeder, the document is fed one
page at a time. This feed method cannot be used with double-
sided documents (however, they can be scanned one side at a
time). This feed method is best with a document consisting of
a few single-sided pages. In addition, thick paper and thin
paper can be scanned using this feed method. See p. 4-7,
p. 4-9.
Manual feeding The document is placed directly on the original glass, then
scanned. Each document must be positioned manually (the
previous one must be removed and the next one placed on the
original glass). This method is best with books and other
documents that cannot be fed through the duplexing document
feeder. See p. 4-11, p. 4-12, p. 4-13, p. 4-14.