Kyocera KM-C1530 - Manual (Page 93)

Basic Operations 5
KM-C1530 5-5
5.3 Making Copies on Paper Loaded into the 1st
Drawer (Multipurpose Paper Drawer)
When making continuous copies onto special paper, such as overhead
projector transparencies, postcards or thick paper, whether a standard or
non-standard size, load the paper into the 1st drawer (the multipurpose
paper drawer).
Sizes and types of paper that can be used:
● Automatically detected paper sizes:
5-1/2 × 8-1/2L, 5-1/2 × 8-1/2C, ExecutiveL, ExecutiveC, LetterL,
LetterC, LegalL, 11 × 17L, 12-1/4 × 18L
● Manually set paper sizes:
A6L, B6L, A5L, A5C, B5L, B5C, A4L, A4C, B4L, A3L, 11 × 14L, FLS L,
4 × 6
Refer to the section “To set the “1st Drawer Paper Select” parameter”
on page 7-18 for more details.
● Selectable paper sizes
Width: 3-9/16 to 12-1/4 in. (90 to 311 mm)
Length: 5-1/2 to 18 in. (140 to 457 mm)
Refer to the section “To set the “1st Drawer Paper Select” parameter”
on page 7-18 for more details.
● Paper types:
Standard paper (thickness: 17 to 24 lbs.)
Thick paper 1 (thickness: 24-1/4 to 43-1/4 lbs.)
Overhead projector transparencies
Second side of a double-sided copy on standard paper
Second side of a double-sided copy on thick paper 1