Kyocera KM-C1530 User Manual
Page 43
Before Making Copies
2
KM-C1530
2-21
6
Start key
• Press to start the copy operation.
• If this key is pressed while the copier is warming up, the
copy job is delayed until the copier is finished warming
up. See p. 2-26.
• The [Start] key indicator lights up in green to indicate that
the copier can begin copying. The [Start] key indicator
lights up in orange to indicate that the copier cannot
make copies.
7
Stop key
• Press to stop a continuous copy operation.
8
C (clear) key
• Press to reset the number of copies to “1”.
• Press to erase a setting, such as the zoom ratio or size,
selected using the keypad.
9
Panel Reset key
• Press to reset all copy functions and settings to their
defaults. (All selected settings are cancelled.)
See p. 2-25.
* Stored zoom ratios, stored job settings, and interrupted or
delayed copy jobs are not cancelled.
10
Interrupt key
• Press to interrupt a copy job. (The [Interrupt] key
indicator lights up in green to indicate that the copier is
in Interrupt mode.)
• Press again to cancel Interrupt mode or to return the
copier to the mode before it entered Interrupt mode. See
p. 2-27.
11
Energy Saver key
• Press to enter Energy Saver mode. See p. 2-26.
12
Access key
• Press when making copies using an access code.
13
Copy key
• Press to enter Copy mode and use the copier as a
copier.
• The [Copy] key indicator lights up in green to indicate
that the copier is in Copy mode.
14
Scan key
• Press to enter Scanner mode and use the copier as a
color scanner.
• The [Scan] key indicator lights up in green to indicate
that the copier is in Scanner mode.
15
Keypad
• Use to type in the number of copies to be made.
• Use to type in the zoom ratio.
• Use to type in the various settings.
No.
Part Name
Description