Kyocera KM-C1530 - Manual (Page 242)

9 Touch Panel Messages
9-38 KM-C1530
3 Turn the dial to the left in order to
position the stapler at the center.
4 Pull the staple holder out toward you.
❍ Finisher F-8430
❍ Finisher F-8110
? Since finisher F-8430 is
equipped with two staple
holders, which staple holder
should be pulled out?
➜ The message on the touch
panel indicates which staple
holder should be pulled out.
5 Push the staple holder guide up,
and then pull out one sheet of
staples.
Stapler 1
Stapler 2
Stapler 1