Ee p. 2-29 – Kyocera KM-C1530 User Manual

Page 51

Advertising
background image

Before Making Copies

2

KM-C1530

2-29

2.7

Power Switch and Default Settings

Turning the copier on and off

To turn the copier on

Set the power switch to “

1

”.

To turn the copier off

Set the power switch to “

2

”.

Note
Do not turn off the copier while it is making copies, otherwise a paper
misfeed may occur. Make sure that all copy operations are finished
before turning off the copier.
When the copier is turned off, all settings except the stored zoom
ratios and other stored settings in addition to the Utility mode settings
are reset to their defaults.

Note
If the copier is not used for 15 minutes, it automatically enters Energy
Saver mode. In addition, after the copier is not used for 30 minutes, it
automatically turns itself off (Sleep mode).
The length of time until the copier enters Energy Saver mode or Sleep
mode can be set using the “User’s Choice” function. For more details,
refer to “Specifying Default Settings (“User’s Choice” Function)” on
page 7-8,
page 7-16, and page 7-17.

CAUTION

If the copier will not be used for a short period of time (overnight,
etc.), turn the main switch OFF (O). If it will not be used for an ex-
tended period of time (vacations, etc.), remove the power plug
from the outlet for safety purposes during the time the copier is
not in use.

Advertising