Kyocera KM-C1530 - Manual (Page 174)

8 Administrator Mode Operations
8-4 KM-C1530
4 After all access codes have been
registered, touch [Enter] in the
Access # Input screen, and then
touch [Enter] in the Copy Track
screen.
5 In the Administrator Mode screen, touch [Exit].
6 In the Utility screen, touch [Exit].
✎
Note
If an access code has been specified, a screen appears so that access
code can be entered. Use the keypad to enter the access code, and
then press the [Access] key to display the Basic screen and make
copies. For more details, refer to “Access Codes” on page 2-28.
To change the account numbers registered
Although account numbers 1 through 99 are already registered as a
default, they can be changed. Account numbers between 1 and 998 can
be registered.
Important)
✔ A maximum of 99 account numbers can be registered at one time.
Additional accounts cannot be added.
1 In the Copy Track screen, touch
[ON], and then touch [Access #
Input].
The Access # Input screen appears.