Kyocera KM-C1530 - Manual (Page 215)

Touch Panel Messages 9
KM-C1530 9-11
9.3 When the Message “Replace Staple Cartridge X.”
Appears
When finisher F-8110 or F-8430 is installed and is about to run out of
staples, the message shown below appears.
Follow the procedure below to replace the staple cartridge.
To replace the staple cartridge
1 Slide the finisher away from the
copier.
2 If finisher F-8430 is installed, open
right-side door FN7.