Kyocera KM-C1530 - Manual (Page 206)

9 Touch Panel Messages
9-2 KM-C1530
To load paper into the 1st drawer (250-sheet multipurpose paper
drawer)
1 Pull out the paper drawer.
? Has the paper take-up roller
been touched?
➜ Be careful not to touch the
surface of the paper take-up
roller with your hands. If the
roller has been touched, wipe it
with a dry cloth.
2 Press down on the paper-lifting
plate until it locks into place.
3 Load the paper into the drawer so
that the front side of the paper (the
side facing up when the package
was unwrapped) faces up.
? Have you loaded too much
paper into the drawer?
➜ Do not load so much paper that
the top of the stack is higher
than the
Ä mark.
? Has the paper been loaded correctly?
➜ Make sure to align the stack of paper.
➜ Make sure that the paper is not curled when it is loaded.
? Do you wish to load a paper size or type different from that
previously loaded?
➜ For more details on changing the paper size and type, refer to
“Loading Paper” on page 3-7.
Paper take-
up roller