To select the finishing settings -11 – Kyocera KM-C1530 User Manual

Page 123

Advertising
background image

Advanced Operations

6

KM-C1530

6-11

* A print job is a print command sent from a computer to the optional printer controller, then

printed by this machine.

To select the finishing settings

1

Position the document(s) to be copied. (Refer to page 4-1 for more
details.)

2

Select the desired color mode. (Refer to page 2-20 for more details.)

3

Touch [Finishing].

4

Select the desired finishing settings.
The screen shown at the right
appears when the 10-mailbin sorter
(AS-M4110) is installed. If the
finisher is installed, [Sort] and
[Group] do not appear.

5

Specify any other necessary settings.

6

Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.

Group

10-Mailbin Sorter (AS-
M4110)

For a copy job, the output is fed into mailbin
1.
The number of mailbins that can be used to
receive the output can be set between a
maximum of 10 and a minimum of 2,
according to the “Mail Bin Assignment”
parameter setting. For more details, refer to
the section “To set the “Mail Bin
Assignment” parameter” on page 7-14
.

Setting

Options Installed

Operation

Advertising